Flush Outlet Connections

All flush (wall-mounted) outlets are cast brass construction and come furnished with caps, chain and an escutcheon.

• Click Here For Accessories

Call us TODAY at 727-835-0657 or
Toll Free at 800-761-4298

Get A Free Quote!

Bodies rated for 175 psi (12.1 bar).
Each 2½" NHT inlet has a rated flow of 250 gpm (946 lpm).
Supplied with cap(s)(#310) and chain(s).
Unless otherwise noted, all hose threads are NHT. See index T-13 for available optional threads.
See page 13-20 for Flush 4-Way Outlet Connections
2½" nipple required for all 163, 163P and 167WP models. Elkhart Brass does not supply.
On the 163 and 163P, the body is roughed in during construction; escutcheon and nipple assemblies are installed after construction.
Elkhart Brass personnel can help with construction installation information.
Elkhart Brass flush outlet 164 - A cast brass valve control for use with Elkhart's model 163 is available.
The 164 comes with a 7⁄8" square steel extension rod that is 24" long and
has a special coupling for attaching to stem of gate valve.
Additionally, a cap, chain and 7" square escutcheon are included.
Please specify polished brass or polished chrome-plated.
(Note: a 2 ½" hole is required in the installation wall.)
480 - Tee handle used with 164 control valve.

Figure 1
flush outlet fig 1 from Elkhart Brass
Figure 2
flush outlet Fig 2 from Elkhart Brass
Figure 4
flush outlet fig 4 from Elkhart Brass
163/163P 90°
Figure 5
flush outlet Fig 5 from Elkhart Brass
Figure 6
flush outlet Fig 6 from Elkhart Brass
167-WP 90°

Fire Hose Reels Available from mdi

Hannay Fire Hose Reels
Hannay Fire Hose Reels
Coxreels Fire Hose Reels
Coxreels Hose Reels